CaffeLatex Tubeless Tape 50m
Reinforced by a dense glass-fiber matrix, a single layer of Caffé Tubeless Tape can stand high pressure: replacing standard rim-tape, Caffé Tubeless Tape perfectly adapts to rim internal profile and makes standard rims air-tight, sealing spoke holes.
Caffé Tubeless Tape will allow the use of Tubeless, Tubeless-Ready and TNT (Tube No Tube) tyres on most standard mtb wheels.
Three different widths are available:
Size S: 21mm, for rims with external section from 22 up to 25 mm;
Size M: 25 mm, for rims with external section from 25 up to 28 mm.
Size L: 29mm, for rims with external section from wider 29 mm.
There are two different lenght options as well: 5 m is enough for two wheels (26” or 29”), 50 m is recommended for shops or teams.
Use the recommended tool to punch the valve hole into the tape
before gluing Caffé Tape inside the rim, carefully clean the rim-bed, removing any trace of grease or lubricant (use alcohol or other de-greaser, then - VERY IMPORTANT – clean carefully with a clean, dry cloth. Adhesion of the tape on dried-up alcohol is not good);
use a sharp spike or a screwdriver to make a round hole in Caffé Tubeless Tape at the valve hole. AVOID using a cutter knife and doing an “X” cut, that would prevent proper air-tightness at the valve base.